Portable Workstation Evaporative Cooler
6 Gallon internal water reservoir that allows the unit to operate approximately
4-6 hours without being connected to an external water source. 10°F - 30°F
of evaporative cooling plus 6°F - 8°F of wind chill cooling. Provides
cooling up to 25' in front of the unit over a 500 sq ft area. Shippable
via UPS
|
Evaporative Cooling Temperature Drops |
|
Air Temperature |
Relative Humidity |
| 10% |
30% |
50% |
| 80° |
-22° |
-16° |
-10° |
| 90° |
-25° |
-18° |
-12° |
| 100° |
-29° |
-21° |
-14° |
| 110° |
-32° |
-23° |
-15° |
Features:
- Reduces air temperatures 10 to 30 degrees
- Provides cooling up to 25' in front of the
unit over a 500 sq ft area
- High air volume, two-speed, four-blade axial
fan generates 3800 CFM's of evaporative air
- Powder coated, heavy gauge steel
construction
- 4" thick highly efficient cooling pads
containing a coated protective edge
- All Four wheels are swivel bearing 2 1/2"
diameter for easier portability on many surface types
- Rubber mat top for tool placement
- Internal reservoir with water capacity of
6-gallons for remote applications, includes overside inlet opening for easy
manual water fill-up
- 4” thick evaporative media easily accessible
for routine cleaning
- Auto refill hose connection for continuous
use with a garden hose
- Can operate 4-hours on a manual fill-up
- Includes 17' long cord with GFCI protection
plug
Benefits:
- Significantly reduce air temperatures and
generates a cooler and more comfortable working environment
- Compact portable cooling system with quiet
fan axial blower design
- Easy to operate and maintain, plus an
economical solution to a low cost spot cooling system
- Cooling media pad contains a corrugated
treated CELdek material with a rigid protective edge coating (Munters MI-T-edg®)
to extend the life of the pad, plus provide added weather and algae
protection, durability, and formulated to withstand repeated cleaning without
damage to the pad
- Ready to plug into any 120VAC receptacle and
hooks up to any standard garden hose for direct water supply
- Internal reservoir will hold six gallons of
water for remote locations when a direct water supply is not available
- Applications would include work shop
environments, material handling areas, automotive shops, office areas, and
many more
Specifications:
- Water supplied to internal tank from a
standard 3/4” water hose or manually through manual fill inlet
- Water level in internal tank controlled by
the unit’s float valve
- Cooling Media Type: CELdesk high
cellulose corrugated treated media pads for effective cooling, plus resist
degradation. Cross fluted design induces highly turbulent mixing of air
& water for optimum cooling and enhanced self-cleaning
- Cooling Media Size: 18" x 18" and 4"
thick
- Maintenance free submersible water pump
- Cord: 17’ long, 18 ga. 3-conductor
cord with GFCI plug
- Switch: Dual rocker switch design
#1 - Pump On / Pump Off;
#2 - Fan High / Off / Fan Low
- Motor: Thermally protected,
permanently lubricated 2-speed, 1/8 hp fan motor, 1.5 Amps
- CFM: 2200 - 3800
- Blade: 12" aluminum axial four-paddle blade,
33° pitch
- Protective Guard: 1/2" grid plastic
diffuser, white finish
- Power requirements: 120-VAC; 3-Amps
- Dimensions: 22" wide x 29" tall
x 18-1/2" deep
Unit weight: 51 lbs (without water in the reservoir)
- Water supply: Standard garden hose
connection or hand fill reservoir
- 4” heavy duty casters: 2 locking - 2
non-locking
- Meets OSHA requirements / 1 year limited
warranty
|
