Single Bulb Heat Lamp
The Bulb Heater Series provides instant
supplemental heat where it is needed the most. Utilizes a 250 watt maximum type
R40 medium base infrared lamp to deliver silent heat to the room and is rated
type IC for ceilings insulated to R-40 (lamp not included). HVI2100 Certified
and Rated type IC for ceiling insulated to R-40. Easily installs using the
included adjustable hanging brackets.
- Uses one or two 250 watt maximum R-40
infrared bulbs (Not included).
- Includes adjustable hanging brackets for
mounting to joist on 16" centers or large keyhole slots.
- 120 Volts, 2.0 amps, 60 hz.
- Grill: White, polymeric grill (flame
retardant ABS UL rated 94-5V) secured in place with torsion springs; easily
removed if necessary, dimensions - 10" x 10"
- Heater Housing: 23 gauge painted steel
housing. Dimensions 8 1/4"x 8" x 5 7/8".
- Lamp Information: 1 - 250 watt maximum,
type R40 bulb, medium base, 850 Btu.
- Unit Mounting: The housing will mount in
ceilings with at least 6" of clearance and through drywall thickness up to
3/4", with a rough-in opening of 8 1/4" x 8". Rated for ceilings insulated to
R-40. The housing will mount between 16" on center joists, using the 4
supplied housing mounting rails.
Download the Instruction Manual
Question: What is the amp requirement for the circuit powering this type fixture?
Answer: The Single Bulb Heat Lamp requires 2.0 Amps.
Question: Can you put this lamp in a shower?
Answer: No, the Infrared Bathroom Heat Lamp cannot be installed over a tub or in a shower stall enclosure.
Question: Does this need an exhaust duct?
Answer: Since this model is a heat lamp only you do not need to duct it.
Question: Is the white surface metal or plastic?
Answer: The white grill on the Infrared Bathroom Heat lamp is plastic. It is a polymeric material that is flame retardant.
Infrared Bathroom Heat Lamp Only