Fantech Energy Recovery Ventilator - SE704N
Compact ERV with easy mount wall bracket. Brings a continuous
supply of fresh air into a home while exhausting an equal amount of contaminated
air. The enthalpic core at the center of the unit transfers heat and moisture
from the incoming air to the outgoing air. The air brought into the living area
is cooled and the humidity is reduced for maximum comfort. Reduces the load on a
home’s air conditioner to save on cooling costs.
FEATURES
-
Super Compact Size
-
Includes Easy-Mount Wall Bracket
-
Enthalpy Core
-
4˝ (100mm) Duct Connection
-
No Balancing Required
-
Unit Can Be Installed In Any Position
-
No Defrost or Drain Pan Needed
-
Easy Access Service Door
-
3’ (914mm) Plug-in Power Cord
-
Only 25 lbs (11 kg)
-
Electrostatic Filters (washable)
-
Easy Core Guide Channels For Removing Core
-
Single Speed Ventilation
SPECIFICATIONS
Case—24 gauge galvanized steel. Baked powder coated paint,
antique white. Cabinet fully insulated with 1" (25 mm) aluminum foil-face high
density polystyrene foam to prevent condensation and meet the requirements of
the UL 94HF.
Motors—Two (2) German-manufactured, factory-balanced ebm™ motors with backward
curved blades. Motors come with permanently lubricated sealed ball bearings to
guarantee long life and maintenance-free operation. Seven (7) year warranty.
Steep fan curve requires no balancing.
Core—Enthalpy core configured for efficient cross-flow ventilation. Core is 8.5˝
x 8.5˝ (216 x 216 mm) with a 8˝ (205 mm) depth. Cores are manufactured to
withstand large temperature variations.
Filters—Two (2) Washable Electrostatic Panel Type Air Filters, 8.5˝ (216mm) x 8˝
(203mm) x 0.125˝ (3mm).
Controls—Unit is designed to operate continuously on a single speed. See FDT 7
under accessories or contact Tech Support for possible intermittent,
line-voltage options.
Serviceability—Core, filters, and motors can be easily accessed through latched
door. Core conveniently slides out on our new easy glide core guides. 10˝
(250mm) of clearance is recommended for removal of core.
Duct Connection—4˝ (100mm) steel duct connections with rubber gasket for easy
sealing.
Warranty—Limited 5 year on Enthalpy core, 7 year on motors, and 5 year on parts.
|
