Fantech Energy Recovery Ventilator
Incoming fresh outdoor air is filtered then
cooled and dehumidified by the stale outgoing air, as it passes through an
enthalpy energy recovery core. The ERV then distributes the conditioned air
throughout the home by direct ductwork installed specifically for the ERV or
through the ductwork of a forced-air system.
FEATURES
- Simple Yet Sophisticated Design Makes These
Units the Most Reliable HRVs on the Market
- Enthalpy Core
- EBM Motors with Backward Incline Propellers
- Steep Fan Curves for Superior Airflow
Performance
- No Balancing Required
- Insulated with 1" (25mm) Foil-Faced High
Density Polystyrene Foam
- No Drain Needed on SER 1504N, SER 2004N, SER
3204N
SPECIFICATIONS
Case—22 gauge galvanized steel on the SER
2004/2004N; 24 gauge galvanized steel on the SER 1504/1504N; 20 gauge galvanized
steel on the SER 3204D/3204N. Baked powder coated paint, antique white.
Insulated with foil-faced 1" (25 mm) high density polystyrene foam to prevent
condensation and meet the requirements of the Underwriters Laboratories 94HF.
Motors—German-manufactured, factory balanced ebm motors with backward curved
blades and permanently lubricated sealed bearings. Engineered to run over
100,000 hours continuously. Motor warranty 7 years.
Core—Semi-permeable energy recovery cores configured for an efficient cross-flow
ventilation. Manufactured to withstand extreme temperature variations. Core
warranty 5 years.
Filters—Washable Electrostatic Panel Type Air Filters.
Controls—External three (3) position (Low/Stand By/Medium) rocker switch that
will offer continuous ventilation. Fantech offers a variety of external
controls. (see optional controls) External dry contacts provided.
Defrost—The SER 1504, SER 2004 and SER 3204D have a built-in defrost mechanism
that activates at 23°F (-5°C) in order to prevent the energy transfer core from
freezing. They also include a condensate drain pan & spout.
Serviceability—Core, filters, and motors can be easily serviced through latched
access door. Electrical box, placed on the outside of the unit, can also be
easily accessed.
 
| Measurement |
SER
1504/1504N |
| A |
2 1/4" (56mm) |
| B |
23 1/2" (596mm) |
| C |
2 5/8" (67mm) |
| D |
17 3/8" (441mm) |
| E |
16 1/8" (413mm) |
| F |
6" (152mm) |
SE Series provide exhaust only ventilation
during defrost sequence (except SE "N" and SER "N" models which have no
defrost cycle). Balancing damper provided.
Note: SE (N) models have no defrost and are not recommended for climates
that experience freezing conditions for long periods. These models are
also multipositional.
Performance Data
| Model |
Total
Recovery Efficiency (TRE) at 95°F (35°C) |
Apparent
Sensible Effectiveness (ASE) at 32°F (0°C) |
| SER 1504N |
45% |
76% |
| 
