Flood Stop Water Heater Valve Photo
Prevent Water Heaters from flooding
your property:
Water Heaters have a limited life, then leak after years of corrosion. Water Heaters are generally considered a maintenance-free appliance, but they are also one of the single most damaging appliances in the home. Because Water Heaters are continually under pressure, even small pressurized leaks can quickly flood and devastate a home. Whether at home, at work, or on vacation these flooding
events can go undetected for hours or even days.
Without FloodStop, Flooding Will Continue:
Unexpected appliance failures cause flooding and water damage, which will continue unabated until the problem is discovered and the water supply is
manually shut off.
With FloodStop, Property Damage is
Avoided:
Water loss from unexpected appliance failures and hose ruptures are detected by
FloodStop's water/leak sensor, and the water supply is automatically and
immediately shut off.
FloodStop (FS 1.00-NPT) automatically shuts off
the water supply to the Water Heater and sounds an alarm, leaving all other
household fixtures and appliances operational. Easily installed in fifteen
minutes. 5-Year Manufacturer's Warranty.
FloodStop 1.00 NPT Components:
- Motorized Full-Port Ball Valve (1 inch NPT
pipe threaded)
- Control Unit (with Battery Backup 4 X C
Size)
- Water/Leak Sensor (1.25” X 7.5”)
- AC Power Adaptor (or use 4 X C Batteries as
Primary Power Source)
- Output Contact Wires (2)
- Installation Guide
How FloodStop
1.00 NPT Works:
• The FloodStop valve is installed between the Water Heater and its manual
shutoff valve.
• Water/leak sensor is placed at the base of the Water Heater
• Valve stays open until water loss is detected
• Water on sensor closes FloodStop valve and sounds alarm
• Valve stays closed until problem is attended to and system is reset
 | 
