Methane (Natural Gas)
Gas Detector Alarm With 1" Valve Control
Includes : Methane Detector, 500 MA, AC Adapter, 120 VAC plug in
power adapter, 12V battery back up with holder, and 1" NPT Valve
Professional Installation is recommended from a licensed installer. This
system will automatically close the gas valve when propane gas levels reach 4000
ppm (natural gas 10,000 ppm). The unit will also sound an audible alarm.
The gas valve remains closed, until the following two conditions are met: Gas
vapors are no longer present and the unit is manually reset.
Important Notes: This device must be plugged into a non switched outlet.
One detector is recommended for each room up to 400 sq. ft. The unit
should be mounted in close proximity to the gas appliances. The unit
should be mounted so that air is drawn in from the front and flows freely
through the unit. Recommended mounting heights for propane gas is
approximately 4" from the floor. Natural gas units should be mounted 4"
from the ceiling. The unit is equipped with a self check internal testing
circuit.
Specifications :
120 VAC plug in power adapter (included), as well as 5 hr
battery back-up system
The unit operates in the following temperature ranges:
Natural Gas - 32 - 120 degree F and Propane Gas - 0 - 120 degrees F
Alarm Threshold: Methane 10,000 PPM and Propane 4000 PPM
Audible alarm - 85 decibels, plus flash red indicator light
on detector
Conforms to UL 1484 for home and RV use
Unit dimensions: Natural gas models: 7.25" w x 4" h x 5" d
- Propane models: 7.2" w x 4.1" h x 5.6" d
Manufacturers warranty one year limited