|
SecureLinc Wireless Home Security System
Easy-to-use, Long Range Wireless Security
System to Safeguard Your Home and Family
The SecureLinc Wireless Home Security System is
a full-featured, customizable security alarm system that connects in a fraction
of the time of hardwired systems and includes everything you'll need to get your
home security started. Just plug the main unit in to power and a phone jack,
mount the wireless sensors in the zones you want to protect, and you're ready to
program the system.
The SecureLinc Wireless Home Security System supports 28 wireless zones and two
hardwired zones with the ability to record up to 100 events in its internal log.
The kit includes two four-button wireless keyfobs, three wireless magnetic
window/door contacts, and two 85-Pound Pet Immune Wireless Motion Detectors.
Additional contacts, detectors and keyfobs may be purchased separately to expand
your system based on your installation needs. Read the
Installation
Guide and
User's Guide.
- Wirelessly communicates to security sensors
up to 300 feet away
- Automatically calls four telephone numbers
and plays a user recorded message if alarm is activated
- Arm or disarm using a keychain remote or
wireless keypad
- Connects to the PowerLink (sold separately)
for remote access and control of the system
- Fast and easy setup, installs in less than
an hour
What's Included:
- SecureLinc panel
- SecureLinc panel backing
- SecureLinc panel mounting hardware
- 3 magnetic contact transmitter (2 pieces
each)
- 3 magnetic contact transmitter installation
hardware
- 3 magnetic contact transmitter instructions
- 2 miniature keyfob transmitters with 12V
alkaline battery
- 2 miniature keyfob transmitter instructions
- AC adapter
- Ni-MH battery backup pack
- 2 85-lb. pet-immune PIR motion sensors
- 2 wireless PIR detector instructions
- End-of-line resistors
- Instructions -
Installation Guide and
User's Guide
More Info
Easy to Program and Control Securely
Programming the SecureLinc panel is easy, using the large, backlit buttons and
the LCD screen. You can also mount a Wireless 2-Way Keypad by any entry to your
home where it will communicate your commands acting as a remote panel
controller. The wireless keypad receives status reports from the SecureLinc
panel, so you'll know at a glance what the status of the system is as well as if
any events occurred while you were out. Transmit signals to your SecureLinc
Wireless Home Security System using a keyfob transmitter. A keyfob transmitter
allows you to arm your panel in home or away mode, disarm your panel or transmit
an X10 lighting command. Upon pressing any of the four recessed buttons, the
keyfob transmits a CodeSecure™ digital sequence along with a 4-bit function code
associated with the button that was pressed. Different digital sequences are
transmitted each time, so that malicious code grabbing is almost impossible.
Includes Pet Immune Motion Sensors
Pet immune motion sensors are included in this kit which mean that the system
will not be triggered falsely when your cat or dog walks across the protected
room. Due to their smaller profile, pets can be ignored by the pet immune motion
sensors preventing a false alarm. With a coverage area of 30 by 30 feet, these
fully supervised detectors will keep an eye on your home when you're not around.
Built in Siren and Phone Dialer
When it detects an alarm signal from one of the wireless sensors, the alarm
system blasts an 85dB siren that not only alerts your family, but also sends
would-be thieves fleeing. In addition, you can program it to call any private
phone number (i.e.: a friend or neighbor, your office, your wireless phone,
etc.) and play a pre-recorded message in your own voice if connected to your
standard telephone or to a cellular network (via the GSM Modem for Web-Enabled
Security Kits). It doesn't even need its own dedicated phone line! It also
supports 24-hour monitoring by commercial alarm monitoring personnel, who can
dispatch police, fire or medical response (depending on the type of alert it
receives). It can even call you for non-alarm events. For example, want to know
that your kids arrived home safely from school? The security system can call you
at the office to let you know that your child successfully disarmed the alarm.
Individual User Codes and Message Center
The SecureLinc Wireless Home Security System supports up to 8 individual user
codes, so each member of your household can have an independent code ID. It also
doubles as a message center, so you can hear and leave messages up to 20 seconds
for other family members. User names for codes 5-8 can be recorded and will be
played during a Latchkey report.
Internet Connectivity Via an Optional Powerlink
Connect your SecureLinc to the PowerLink (sold separately) for remote control of
your security system from any Internet-connected computer in the world. The
PowerLink also allows remote or on-site visual surveillance, connecting to up to
four wired or wireless cameras (each sold separately). The PowerLink can also be
purchased with a single wired or wireless camera as a kit.
Lighting Control via X10
For maximum convenience, SecureLinc Wireless Home Security System can even
operate 15 X10-controlled lights or appliances (or 15 groups of lights or
appliances), including 2-way appliances and those with dim/bright features. In
addition to scheduling your X10 appliances to prepare your home for your arrival
at night or from a vacation, you can also use the X10 timer function to make
your home look occupied when you're away. Or you can have it turn the
X10-controlled porch light on for four minutes when you arm or disarm the
system, so that you'll never have to enter or leave your house in the dark.
Note: To access these features, you'll need the optional X10 Cable & Interface,
sold separately.
NOTE: It's important to note that while "Voice Over IP" can work with a home
alarm system, we do not recommend it. If for any reason you lose your Internet
connectivity - due to a power outage or problem with your Internet service
provider, for example - "Voice Over IP" will not work, and your alarm system
will not be able to make an emergency call if it's triggered. For this reason we
recommend you keep a basic traditional landline dedicated to your home alarm
system and use "Voice Over IP" for the rest of your calling needs.
Specifications
Manufacturer: SecureLinc
Manufacturer Product No.: Plus #7
Dimensions: 10 13/16" x 8" x 2 1/8" (275mm x 203mm x 55mm)
Weight: 990g (2.2 pounds) without batteries
Zones: 28 wireless, 2 hardwired
Hardwired Zone Requirements: 2.2 k. E.O.L. resistance (max. resistance of wires
220)
Zone Types: Interior follower, perimeter, perimeter follower, delay 1, delay 2,
24h silent, 24h audible, fire, non-alarm, emergency, gas and flood
User Codes: 8 codes, 4 digits each
Control Facilities: Integral keypad, PowerCode hand-held transmitters, wireless
commander, MCM-140+, remote telephone, local or remote computer
Display: Single line, back lighted 16-character LCD and 4 LED indicators
Arming Modes: AWAY, HOME, AWAY-INSTANT, HOMEINSTANT, LATCHKEY, FORCED, BYPASS
Alarm Types: Silent alarm, siren alarm or sounder (internal) alarm, in
accordance with zone attributes
Siren Signals: Continuous (intrusion / 24 hours / panic); triple pulse - pause -
triple pulse (fire)
Siren Timeout: Programmable (4 min. by default)
Internal Sounder Output: At least 85 dBA at 10 ft. (3m)
Supervision: Programmable time frame for inactivity alert
Data Retrieval: Status, alarm memory, trouble, event log
Operating Frequencies: 315 MHz (in USA & Canada) or other UHF channels per local
requirement in the country of use
Receiver Type: Super-heterodyne, fixed frequency
Receiver Range: 600 ft. (180m) in open space
Antenna Type: Spatial diversity
Coding: PowerCode and/or CodeSecure™
Power Supply: Plug-in transformer 120 VAC, 60 Hz / 9 VAC, 1A (in the U.S.A.);
230 VAC, 50 Hz / 9 VAC, 1A
Current Drain: Approx. 65 mA standby, 800 mA at full load and in alarm
Site External Siren Current (EXT): 450 mA max @ 10.5 VDC when powered by AC & DC
(battery)
Site Internal Siren Current (INT): 450 mA max. @ 10.5 VDC when powered by AC &
DC (battery)
PGM Output Current: 100 mA max.
Detector 1 & 2 Total (Sum) Current: 100 mA max.
High Current / Short Circuit Protection: All outputs are protected (current
limited)
Battery Test: Once every 10 seconds
Built-in Modem: 300 baud, Bell 103 protocol
Data Transfer to Local Computer: Via RS232 serial port
Report Destinations: 2 central stations, 4 private telephones, 1 pager
Reporting Format Options: SIA, Pulse 4/2 1900/1400 Hz, Pulse 4/2 1800/2300 Hz,
Contact ID, Scancom
Pulse Rate: 10, 20, 33 and 40 pps - programmable
Message to Private Phones: Tone or voice
Message to Pager: PIN No. Alarm Type, Zone No.
Operating Temperature Range: 32°F to 120°F (0°C to 49°C)
Storage Temperature Range: -4°F to 140°F (-20°C to 60°C)
Humidity: 85% relative humidity, @ 30°C (86°F)
Approvals: FCC compliant, UL listed
Warranty: 1 year, limited
Magnetic Contact Transmitters
Dimensions: 3 3/16" x 7/8" x 15/16" (81mm x 22mm x 23.5mm)
Weight: 1.2 oz. (34g), excluding battery
Battery Weight: 0.45 oz. (13g)
Frequency: 315, 433.92, 868.95
Transmitter's ID Code: 24-bit digital word, over 16 million combinations, pulse
width modulation
Overall Message Length: 36 bits
Alarm Inputs: 2: one internal, one external, each with a separate 24-bit
transmitter
Auxiliary Input Circuit Type: N.C. / E.O.L., selected with DIP switch
E.O.L. Resister Required: 47 kilo ohms
Message Repetition: Once every 3 minutes or one-shot, selectable via on-board
DIP switch
Supervision: Signaling at 60-minute intervals via reed switch or aux. input,
including battery supervision
Tamper Reporting: Every 3 minutes until restored
Power Source: 3V Lithium CR-2-type battery, Panasonic or Sanyo only
Battery Life Expectancy: 3 years (typical use)
Operating Temperature: 32° F to 120° F (0° C to 49° C)
Standards: FCC compliant, UL listed
Wireless PIR Detectors
Dimensions: 4.1" x 2.4" x 1.3" (104mm x 60mm x 32mm)
Weight: 2.5 oz. (71g)
Maximum Coverage Range: 30' x 30' (9m x 9m), 90°
Pet Immunity: Up to 85 lbs. (18kg)
Vertical Adjustment: 3-position adjustment scale: 6 ft., 7 ft., and 8 ft. (1.8m,
2.1m, and 2.4m)
Battery Type: 3.6 Volt lithium thionyl chloride (LiSOCl2) battery, size 1/2AA,
Tadiran TL-2150
Nominal Battery Capacity: 1 Ah
Standby Current: 0.015mA
Transmit Current: 12 mA (including LED)
Battery Life Expectancy: 3 years (typical use)
Detector: Dual-element low-noise pyroelectric sensor
Pulse Counter: Programmable to 1,3 or 5 pulses
Rearm Timer: 2 minutes after last alarm
Frequencies: 315, 433.92, 868.95, 869.2625 MHz
Transmission Sequence: 3 data bursts at variable intervals within 3 seconds
ID: 24-bit factory-selected code, >16 million possible combinations
Total Message Length: 36 bits
Operating Temperature: 14° F to 120° F (-10° C to 49° C)
Storage Temperature: -4° F to 140° F (-20° C to 60° C)
FRI Protection: >20 V/m up to 1000 MHz
Standards: FCC and Directive 1999/5/EC compliant, UL listed
Miniature Keyfob Transmitters
Dimensions: 2 1/8" x 1 1/4" x 1/2" (53.5mm x 31.5mm x 12.5mm)
Weight: 3/4 oz./21g (including battery)
Frequency: 315, 433.92, 868.95 MHz
Modulation: ASK (ON-OFF keying)
Coding: 28-bit ID, 4-bit function code and 32-bit rolling code
Transmission Duration: Up to 2 seconds
Power Supply: 12V alkaline battery, type GP 23A or equivalent
Current Consumption: 11 mA (during transmission)
Battery Life Expectancy: 1 year (typical use)
Operating Temperature: 32° F to 120° F (0° C to 49° C)
Standards: FCC compliant, UL listed
|
