Kidde Wireless Smoke Alarm - UL Listed
Direct Wire AC Powered
Many newer homes have interconnected smoke
alarms, but may not have an alarm in every room as recommended by the National
Fire Protection Association. The Kidde Wireless AC Powered Smoke Alarm makes it
easy to expand the coverage of a home's current interconnected system. By
replacing just one current interconnected alarm with a Kidde Wireless AC Powered
Smoke Alarm, a homeowner can quickly and easily install other Kidde Wireless
products in rooms that need fire protection. The Kidde Wireless AC Powered Smoke
Alarm bridges the home's current system to the newly installed wireless products
so that when one alarm sounds, they all sound, providing more warning in more
places, and giving a family more time to escape a fire.
Features:
- Wireless Technology – Uses radio frequency
to both transmit and receive messages about a hazard in the home; when one
alarm sounds, all will sound.
- AC Power with Battery Backup – Enables
homeowners to expand a current interconnected system. Also can be used in
homes with existing hardwired only smoke alarms to create an interconnected
system. 9v battery (included) protects during short-term power outages.
- 85 Decibel Alarm – Alerts residents to
deadly smoke and fire. Loud enough to wake most sleeping adults when placed in
bedrooms and outside of sleeping areas.
- Smart Touch Button – One touch quickly and
temporarily silences nuisance alarms activated by any alarm in the system;
will hush a low battery chirp for up to 12 hours; will test the operation of
the alarm and interconnected system.
- Red LED – Flashes in conjunction with alarm
beep, i.e. during an alarm response, to indicate low battery, or to indicate a
unit error.
- Green LED – Flashes to indicate which alarm
initiates the response, as well as when system is temporarily silenced due to
a nuisance alarm or low battery warning.
- End of Life Warning – Alerts consumer that
it is time to replace the unit ten years after initial power.
- Low Battery Warning – Chirps once a minute
and red LED flashes to indicate batteries need replacing.
- Unique ID Code – Dipswitch pattern inhibits
interference from similar systems nearby.
- Tamper Resistant – Tabs help deter tampering
or theft of unit or battery.
- Twist-off Mounting – Provides quick
installation and easy battery replacement.
- Easy to install – Simply mounts to ceiling
or wall. No wiring needed.
- UL Listed
- 10-year Warranty
|