Sunpak® heaters were specifically designed to provide heated comfort in an outdoor environment. They have been used on outdoor patios across the United States and Canada for over 20 years. When properly integrated into a patio design, Sunpak® heaters generally increase the comfort level 5 to 10 degrees Fahrenheit outdoors. The heating effectiveness will depend on air temperature, wind velocity and other factors.
Sunpak® heaters work best if they are placed in areas of the greatest heat loss,
such as the open side of a semi-protected patio area. The Sunpak® heater may be
mounted at up to a 30 degree angle or face down. Note that the top clearances
required from combustible material increases when heaters are at any angle. The
heater must always be horizontal to the floor. Never mount the heater in the
This Sunpak heater has a two stage output - 34,000 to 25,000 BTUs. This heater is recommended for residential installation and can be easily controlled with a hand held remote or a wireless wall control that has On/Off/High/Low capability. On high this natural gas heater will cover approximately a 12 ft by 12 ft area. On Low, it will cover approximately a 10 ft x 10 ft area. This Sunpak heater can be controlled with the included hand held remote or a wireless wall control that has on, off and high and low settings.
An optional front fascia kit is available in stainless, black or bronze finish for a cleaner look. You can also order an optional wall timer that has 30, 60 and 120 minute options for use with this Sunpak Heater.
Most applications of the Sunpak heater may be angle-mounted to a maximum of 30º to accommodate mounting the heaters around the edges of the patio. Note that the top clearance to combustibles increase.
For use with Sunpak Heater. Fascia only, does not include heater. Available in stainless or black to match your heater.
Sale Price: $157.00
For use with Sunpak S34B TSR and S34S TSR infrared heater. Has 30/60/120 minute push button options.
Sale Price: $77.00