Free Shipping On Many Items!
1.888.845.6597
Garage Through The Wall Ventilation Kit
Does You Garage Feel Like An Oven During Summer Months? More importantly Can You Guess What The US EPA says is the most significant source of indoor air quality health hazards in the home is?
It's Your Attached Garage! Car exhaust contains deadly, dangerous and even many cancer causing particles that can find their way into your home when the garage door is opened. By installing a ventilation fan, on the wall opposite to the door leading into your home, you will greatly reduce the potential for toxic car fumes from entering your home.
Cool and ventilate your garage with our Garage Fan Ventilation Kit. Exhaust heat from your garage as well as prevent toxic automobile fumes from entering your home. Our Garage Cooling/Ventilation Kit exhausts hot stale air from your garage, including car fumes. The fan is a quiet, easy to install, wall mounted garage fan that is energy efficient and completely maintenance free. Designed for easy through the wall installation, this fan features a powerful external rotor motor plus a built-in spring loaded backdraft damper preventing insects from entering your garage.
Recommended Usage For Ventilating Vehicle Exhaust: Wire fan to timer, or garage door opener - to run for 15 minutes every time a car enters/exits the garage. This ventilation fan can be speed controlled.
The Garage Cooling Kit can accommodate any of the following controllers (not included):
- Standard Wall Switch
- Manual Spring Wound Crank Timer
- 24 Hour Pin Timer
- Thermostat
- Electronic Timer, i.e. Intermatic EI220
Fan Specifications:
- 120 VAC 60 Hz - 115 Watts
- Current: 1.0A
- Color: White
- Air Flow: 400 cfm
- Motor: 2800 RPM
- 416 cfm exhaust fan
- Integrated spring loaded backdraft damper
- 5 year warranty
- Download the Installation Instructions
- Download the Submittal Sheet
| CFM vs. Static Pressure (SP) In. WG | ||||||||
| 0" | 0.125" | 0.25" | 0.375" | 0.5" | 0.75" | 1.0" | 1.25" | 1.5" |
| 416 | 395 | 368 | 341 | 324 | 287 | 233 | 184 | 132 |
|
Dimensions in inches - refer to illustration |
|||||
| A | B | C | C1 | C2 | D |
| 15 1/2 | 16 1/16 | 11 7/16 | 3 3/8 | 2 7/16 | 8 |
|
|
|
For each kit, you will need an adequate amount of make-up air, a min. of .35 square feet of net free venting per fan. Never install or run these fans without allowing for the proper amount of supply air, especially, in situations where gas appliances co-exist.
Answer: On the dimensions chart, letter C – is the overall length of the unit from the grill to the back. Subtract 3 3/8 inches and 2 7/16 inches which gives you 5 3/8 inches that will actually be the duct.
Question: Does the unit come with a cord and plug to put into a garage outlet? If so how long is the cord?
Answer: The garage through the wall ventilation fan has to be hard wired, the power cord is not provided.
Question: Can the vent be wired to any electric garage door opener and how is that done?
Answer: Yes, the garage through the wall ventilation fan can be wired to an electric garage door opener. For installation you would contact a licensed electrician or the manufacture of the garage door opener.
Question: Does the kit come with installation instructions? What attaches the the garage end of the duct and is this included in the kit?
Answer: Yes, the garage through the wall fan includes the instructions. Inside the garage you would install an 8 inch grill; this is not included with the fan.
Question: I live in Alaska and the temperature gets down to -20F. Will the motor still work?
Answer: The SWF-200 Through the Wall Ventilation Kit will run at the -20 F.
Question: Can you adjust the fan speed? Can it be set to run continuously at a lower speed?
Answer: Yes, this fan can be wired to a variable speed controller and the motor is rated for continuous run.
Question: What is the Sone rating for this fan?
Answer: The SWF200 fan is rated at 3.2 sones.
