Dryer Duct Booster Fan with Lint Blitzer
Reduce drying times up to 50% in long or
convoluted duct runs with the Dryer Duct Booster. Dry your clothes faster
and prevent lint build up with the new Dryer Duct Booster® Clothes dryers
are often installed in areas of homes where they cannot work effectively. This
is because moist air cannot effectively exit the dryer and exhaust to the
outside—bogging down the entire drying process. If a dryer’s exhaust duct run is
over 25 equivalent feet* or the dryer is experiencing long drying time, your
dryer may need a Dryer Duct Booster fan.
The Dryer Duct Booster®, Model LB1, has been
specifically designed to boost residential capacity clothes dryer duct exhaust
velocities where dryer duct runs exceed 25 equivalent feet. Proper exhaust
velocities will reduce drying times, save energy and prevent lint buildup in the
dryer duct. The LB1 is controlled by an electronic Pressure Response Control (PRC)
for automatic operation. The LB1 utilizes galvanized steel construction, a
reverse inclined, particulate handling impeller that is guaranteed not to clog
with lint and an externally mounted PSC motor for trouble-free operation.
Features:
-
The Lint Blitzer blower wheel. Unlike
traditional in-line fans which can clog with lint, the Lint Blitzer blower
wheel is designed to repel lint while providing optimum velocity
- 5 year warranty and no-clog guarantee
- Save energy by reducing drying times up to
50%
- Permanently lubricated motor positioned
out of the air stream for maximum motor life
- Simple installation in both vertical and
horizontal ducts
|
See the Dryer Duct Booster®, dominate a
traditional inline dryer booster fan.
|
Specifications:
- Blower: 160 cfm
- Motor: 115 Volts ~ 60 Hz 0.80 amps
maximum
- Impeller: Reverse inclined,
particulate handling
- Includes: (1) LB1 wired fan assembly, (1) 16
gauge galvanized steel mounting bracket, (1) mounting hardware packet
- Housing: 22 gauge G90 galvanized steel.
Features rubber isolated mounting brackets which minimize vibration transfer
- Control: Pressure sensing with self-cleaning
sensing tube design. Automatically activates fan based on operation of dryer.
- Material Handling Impeller: The Lint Blitzer
reverse inclined, particulate handling impeller repels lint. 18 gauge G90
galvanized steel.
- Motor: PSC, permanently lubricated ball
bearing motor is located outside the dryer exhaust air stream to prevent
exposure to heat, lint, and moisture.
- Supply Power: 6 foot 115 VAC power cord
factory installed and prewired. Requires installation adjacent to a standard
electrical outlet. Automatically actuated by pressure sensing control.
- Warranty: Five year material, workmanship
and no-clog guarantee.
|
