There's a hidden fire hazard in almost every home...it's the dryer vent!
The buildup of lint over time in your dryer vent poses a potentially dangerous situation. Moreover, clogged dryer vent pipes cause your dryer to work harder and can greatly increase the time it takes to dry your clothes. Read on for the remedy to this little known but very dangerous problem...The LintEater™!
The LintEater™ is designed for the homeowner by
a leading manufacturer of professional duct-cleaning equipment. It effectively
removes dangerous lint build-up in almost every type of dryer vent system, and
it's easy to use with your cordless drill.
The rotating action of the Auger Brush and
flexible rods scours the entire vent wall surface, while traversing the multiple
turns that are common in most vent systems. The included adapters allow you use
the air from your dryer, or a shop vacuum/ blower to completely remove the lint
from the vent while rotary brushing.
The LintEater™ has everything you
need to clean and maintain your entire dryer vent system with professional
results!
What's Included In Each Kit:
1 - Blockage Removal Tool
removes heavy blockages, like animal nests, or attaches to several rods and
a cordless drill to clear out clogged downspouts from ground level. |
1 - self-feeding 4" Auger
Brush
attaches to the flexible rods and makes multiple turns to thoroughly scour
your vent clean. High quality bristles retain shape for repeated use. |
1 - Dryer Adapter
use the dryer air to remove lint while rotary brushing, if you don't have a
shop vac or blower |
1 - Large 2 ¼" Lint Trap
Brush
will reach 42" when connected to one rod - all the way to the bottom of your
lint trap. Exceptional reach also makes it a snap to clean intake vents,
underneath and all around your dryer. Use it around any appliance, remove
cobwebs or connect more rods for any hard-to-reach area around your home.
Safely and easily conforms to tight areas like baseboard heating vents. |
4 - 36" long flexible rods
screw together to reach into dryer vents up to 12 feet from one end |
1 - Vacuum Adapter
connect a standard 2 ¼"hose shop vac or blower to completely remove lint
while rotary brushing |
Plus With This Kit You Get 4 Additional 36"
Flex Rods! | 
