| R.E. Williams' Superfan™ An Innovative break though in Whole House Cooling, it's
the "Ultimate Cooling Machine". Simply unrivaled in its class, it's the best
inline whole house fan available to the consumer today. A bold claim - but we
know that it is true.
Amazingly Quiet and extremely powerful, introducing
The Superfan™ (Patent- pending). The world's first multi-port single exhaust
inline whole house fan.
Designed by expert engineers with years of
experience in ventilation and whole house fan cooling mechanics, this whole
house fan has been crafted by pure genius.
The fan's superior design,
flawless finish, first class components, and unparalleled manufacturing process
are done with one key word in mind - Quality. Assembled under strict
quality control standards, with an intricate attention to detail, everything
about the fan right down to its painted and powder coated finish both on the
interior and exterior of the fan's housing scream of perfection!
What
will the Superfan™ Do For
You? Besides blow you away? It will very
efficiently and quietly cool your home. The Superfan™ is so quiet that you can
operate it while you sleep in pure relaxing comfort. The Superfan™ has the
capacity to exhaust up to four rooms or areas of your home, all from a single
central unit.
The Superfan's Motor: The fan's motor is
designed for many years of maintenance free operation. The fan's motor is
specifically used for pulling large amounts of air through air ducts. This type
of motor is known as a backward curved impeller fan motor. If you were to use a
standard fan for this type of application, the performance and motor life of the
fan would be drastically reduced and even more importantly not work. Why?
Because standard axial fans were never designed to pull air through ducts,
unlike the Superfan™.
Ease of installation: With only one central
unit to install, installation is literally a breeze. The installation process
is quite simple; Carry the fan into attic, assemble exhaust port and front
flange plate in attic. Position fan where desired, select locations for grill
placement, cut out sheet rock, attach grills. Fasten ducting to grill and fan
intake ports, hardwire fan and switch, your done. There is no joist cutting or
any sort of framing involved.
Like a traditional whole house fan, the
Superfan™ works by pulling
fresh cool outdoor air into your home. Simply open a few windows, and allow the
fan to pull cooler outside air into your home. The warm air in your home is
sucked up into your attic at each of the exhaust grills installed in your
ceiling. The warm air is then pushed out of the attic through existing roof
vents. If you do not have the minimum required net free area of roof venting,
that is not a problem. This is the only whole house fan that allows you to
attach a 12" duct to the exhaust port to duct the warm exhaust air coming out of
the fan directly outside.
Four 8" intake ports, allow for up to 25' of
ducting per port to be placed in individual locations throughout the home. For
example, exhaust vents could be placed in 4 separate bedrooms throughout the
home.
The 12" exhaust port, allows for ducting to be
used to exhaust the fan directly to the outside, in cases where there is not
enough net free area of roof venting available. In this scenario, leaving one
of the four intake ports unducted will allow for attic exhaust as well. The 12"
exhaust port can also be left unducted and the warm exhaust air would escape
through existing roof ventilation.
On average the fan is rated for
use in homes up to 3000 sq. ft. This is a cooling fan and should not
be used as a bathroom exhaust fan. The high cubic feet per minute of air
flow is not designed for bathroom ventilation.
Minimum net free area of roof
venting required when the Superfan's exhaust port is left unducted; 3.4 square
feet of net free roof venting.
(4 Eight Inch Exhaust Grilles
Supplied with fan)
Specifications:
-
2500 CFM Fan @ 0" SP
-
Approx. CFM per intake port at
grille opening: 600 CFM
-
120 VAC 60 Hz
-
Variable Speed Controller
Included (Hardwired only)
-
Also can be run with a line cord
for off/on control only.
-
Power Consumption: 598 watts
-
Amps: Running 5.2
-
Up to 100' of 8" Insulated flex
duct
-
Fan Housing Dimensions: 22.5' L
x 14.15" H x 22.5" H
-
Color: Burgundy
-
Fan weight:
Main Unit: 58 lbs
Front Intake Flange: 12 lbs (secured to fan once inside attic)
Fan Exhaust Port - 9 lbs. (also secured to fan once inside attic)
-
Fan Exhaust Port Dimensions:
12" diameter x 16" length
-
Ships in 2 separate boxes.
-
Proudly Manufactured in the USA
Ducting is not included, but available at special pricing.
100% Satisfaction Guaranteed. Backed By Our 60 Day
Money Back Guarantee. We stand behind
our products 100% - For more information visit
www.WholeHousefan.com
| 
