Do you wait for your shower's water to get hot?
How about your kitchen sink? Or any faucet in your home? How long
does it take for the hot water to arrive?
The Wait For Hot Water Is Finally Over!
You can save Up To 16,000 Gallons Of Water Per Year, Per Household (Based on average modern household usage) And Uses Less Energy Than A 25-Watt Light Bulb!
A Breakthrough In Home Comfort!
- Solves The Problem For Your Long Wait For
Hot Water
- Start Saving Money - By Reducing Your
Water Bill
Now The Wait For Hot Water Is Finally Over. Simply installing a Comfort
Series Instant hot water system into your home adds true comfort to daily life
by giving you instant hot water from any source in your home while saving money
and conserving energy.
How It Works?
The system works by putting hot water into the hot water line instantly,
using a pump with a built-in timer at the water heater and one or more bypass
valves. The hot water circulation pump keeps the water in your pipes
moving, resulting in a constant availability of hot water-without the wait or
the waste! And the pump's unique design ensures quiet, maintenance-free
operation.
- Grundfos Pump Installed At Your Water Heater Sends Hot Water Through Your Home's
Pipes
- Comfort Valve Installed At Sink Closes When Hot Water Arrives At Your
Sink
- Comfort Valve Opens And Re-circulates Water Back Through Cold Water
Lines If Water Temperature Gets Cold
You will always have hot water waiting for you at your sink or faucet as well
as showers and fixtures that use hot water.
What about Installation?
The do it yourselfer or professional plumber can easily install this system in less than
30 minutes!
The pump attaches to your existing water heater's hot water line out. Then
you would attach a comfort valve at the water source (like a bathroom or kitchen
sink). That's it!
In the past this type of system would cost thousands of dollars, as a return
line would have to be run back to the water heater. The patented comfort
valves solve this problem, by using your existing cold water lines as a return
line. An ingenious retrofit system that saves you money.
- Easy Installation
- No Return Line Required
- One Pump Is Installed At Your Water Heater
- A Comfort Valve Is Placed On Your Sink At The End Of Each Branch In
Your Home
- Works With Multiple "Comfort" Valves For Complete Home Comfort At
Every Water Source
The positive effect of this hot water circulator can also greatly affect your
pocket book! The water utility savings alone can allow this system to pay
for itself in as little time as its first year of operation.
|

The comfort of instant hot water and the
elimination of water waste is available today with this truly affordable
comfort system. Installing a comfort system in your home adds true
comfort to your daily life by giving you instant hot water from any source
in your home. |
Benefits Of Ownership:
- Instant Hot Water
No waiting or fumbling with shower or faucet controls.
- Water and Energy Conservation
Saves up to 16,000 gallons of water per year per household (average usage)
using less energy than a 25-watt light bulb.
- Cost Savings
Reduces water utility costs and related charges.
- Whisper Quiet Operation
Minimizes operational sound output
- Maintenance Free
No maintenance, no worries - just the enjoyment of instant hot water.
Frequently Asked Questions:
How Does This Work?
Very simply, the pump is installed at the water tank as depicted in picture below:
|

The comfort system pump is installed on your existing hot water heater
"hot water line". The system puts hot water in the hot water line
instantly, using a pump with a built-in timer at the water heater and a
patented bypass valve at the point of use.
|

Comfort valve installed under the farthest faucet from the water heater.
The hot water recirculation pump moves the hot water from the heater
throughout the pipe back to the heater through the cold water line. As the
water heats up at the comfort valve, it closes. When a faucet is turned
on, warm water is instantly available for use with no waste.
|
|
|
|
What is a hot water branch? Hot water lines may branch off
from your main hot water line, like to a bathroom, where it will supply hot
water to a sink and bathtub.
What If I have multiple hot water branches?
You will need to get an extra comfort valve for every extra branch that you have.
If you send the hot water back through the cold water pipes to the water
heater, wouldn't you waste hot water when trying to get cold water? You lose a little bit because the "cooled off" hot water dumped into the cold water line heats the cold water a little bit. This is only important if you are drawing a glass of cold water. More than 99 percent of the cold water is used for other purposes, such as cooking, cleaning, washing the car and toilet flushing. The slightly warm "cold" water is perfectly fine for all these purposes.
I have a tankless water heater, will this work in my system? The
short answer is, no.
Does this system heat my hot water? No, it is a hot water
recirculator, it is a retro-fit to an existing water heater.
Will this work with electric and gas water heaters?
Yes, as long as you have a water heater tank to re-circulate the hot water it
will work.
How does it work? The pump recirculates hot water
through the plumbing system in your home. When the water temp at the
comfort valve hits a pre-determined temperature it closes. When you turn
your sink/shower on, the hot water is at the valve and travels out of the
fixture (remember the valve was installed at the farthest end of the plumbing
run under a sink) - all fixtures/shower in that run will have the hot water
available, instantly. No more waiting for hot water.
How will this save me money? Calculate how many thousands of
gallons of water you use while waiting for hot water each year. Money
will be saved as the wait for hot water will finally be over. Moreover,
you are conserving water and adding a great "creature comfort", instant hot
water to every faucet/shower in your entire home.
What Some Of Our Customers Are Saying?
"The instant hot water pump/valve was easy to install and works great. Wish it was available 25 years ago." Jay S. Astoria, OR.
"Thank you! I Just installed my Instant Hot
Water System and it works great!
I sweat two 3/4" to 1" copper adapters onto my 1" copper line using using mapp
gas and attached the pump...no leaks! Then I installed the valve assembly under
the sink and was very impressed at how the water was hot in 3 seconds. Our home
has an addition with a master bath located far from the heater and it was taking
about 2 min to get the hot water to flow. Also, we have a septic tank and I
wanted to lessen the amount of unnecessary water discharged into it. I had heard
about the pumps on Glenn Hagge's radio show and decided to make the
investment...wow, for $225.00 w/free shipping it was just what we needed and a
great deal too. Jon L., Melrose New York"
Specifications:
Timer: 24 hr, 3 position, 15 minute intervals.
Electrical Cord: 10'
Power: 115 VAC
Pump Data:
Flow Range: 0-3.4 U.S. GPM
Head Range: 0-3.5 U.S. Feet
Motor: Single Phase, 115V
Min. Fluid Temperature 36 Degrees F
Max. Fluid Temperature 150 Degrees F
Max. Working Pressure: 145 PSI
Valve Technical Data:
Patented Technology
Integral Check Valve
ANSI/NSF61 & IAPMO Approved.
CUL/UL/UL EPH/UPC listed.
Warranty: 18 months
Read The
Installation Instructions
R.E. Williams Contractor Inc. GUARANTEES that this product will work
as described. If you are not completely satisfied, simply return the
product within 30 days of purchase for a complete refund, minus less charges. Start experiencing today, a breakthrough
in comfort that you never thought was possible. Do yourself and our
environment a favor, get the Instant Hot Water Comfort System today. Order
online now for fastest processing. Orders ship the same or next business
day. Risk Free Guarantee - We Settle For No Less Than 100% Satisfaction.
|