Free Shipping On Many Items!
1.888.845.6597
GF-14 Garage Fan Cooling And Ventilation System
Garage Ventilation
GF-14 Garage Cooling & Ventilation System
The GF-14 refreshes the garage with clean outside air while lowering temperatures in the garage and attic. This has been the #1 selling garage fan for the last 5 years! Effectively Cools A 2-3 Car Garage.
The fan has been upgraded and
now has a 1/3 HP motor. The housing and ceiling box are now built as one
unit, with heavier gauge metal. The cross bar seats the motor better, and
neoprene washers are used between the motor and cross bar to help make it even
quieter.
The GF-14 Garage Fan and Attic Cooler is designed to mount in the ceiling of the
garage, venting to the attic. Properly-sized intake vents are mounted in the
garage door taking in outside ambient air. The GF-14 moves 1350 cubic feet per
minute, enough air to pressurize a typical attic relative to the house forcing
the superheated attic air out the attic vents, which may include gable vents,
ridge vents, dormer vents, whirly vents, etc.
An adjustable thermostat allows homeowners to decide when the GF-14 should activate for their particular climate or season.
In compliance with local building codes,
garages have 5/8 inch fire-rated drywall and a self-closing fire-rated entry
door. The GF-14 has a fire damper that automatically closes in the event of a
garage fire keeping the flames out of the attic. And the self lubricating,
continuous duty fan motor stops so it doesn't feed a garage fire with air.
The GF-14 Will Require 1.8 square feet net free of intake/exhaust ventilation.
The GF-14 includes fan kit, grille, and two intake grills that should be mounted
to your garage door to allow outside air into the garage. We now also offer
different options of vents with insect screens and a through the wall kit, make
your selection from the Options pulldown by the Add to Cart Button.
** CAUTION - FAILURE TO PROVIDE PROPER INTAKE VENTS CAN RESULT IN BACK DRAFTING
OF GAS APPLIANCES LOCATED THE CONFINES OF YOUR GARAGE **
This unit requires
hardwired installation. We recommend a licensed electrician to properly
wire the unit.
 |
 |
Dimensions:
The Fan is 18” w x 18” w x 17” h With Fire Damper Closed, Open - 22” h
Fan Grill is 17.75” x 17.75” x 0.25”
Intake Grill is 16” w x 8” h x 0.25”
The GF-14 is installed in the attic space above the garage:
 |
 |
|
Powerful Motor Pulls 1350 cubic feet per minute (CFM) of airflow |
|
| The GF-14 includes a grill which is installed onto the ceiling of your garage: | Vents are installed in your garage door - or along the walls of your garage to allow air intake: |
 |
 |
Dimensions: Ships in 18" x 18" x 18" box
55 watts total power consumption
.45 amps power consumption
1/3 HP motor
Available Options:
- GF14 - Includes 2 Steel Stamped Face Intake Grills
- GF14ASG - Includes 2 Aluminum Stamped Face Intake Grills
- GF14ABG - Includes 2 Premium Aluminum Intake Vents w/Insect Screen
- GF14ABB - Includes 2 Premium Aluminum Intake Vents w/Insect Screen w/Aux Frame for Double Skin Insulated Door
- GF14ABF - Includes 1 Premium Aluminum Through The Wall Vent w/Insect Screen - 14 x 16 Through The Wall Intake Vent with Interior frame and expandable from 4″ to 8″ Wall Thickness
Download the Installation Instructions
Warranty - fan housing is warranted to be free from defects for 10 years. The fan motor, thermostat, switch and controls are warrantied for 2 years.
Please note, this fan cannot be returned if installed.
gf-14-garage-cooling-and-ventilation-system.html
$435.00
The GF-14 refreshes the garage with clean outside air while lowering temperatures in the garage and attic. This has been the #1 selling garage fan for the last 5 years! Effectively Cools A 2-3 Car Garage.
The fan has been upgraded and
now has a 1/3 HP motor. The housing and ceiling box are now built as one
unit, with heavier gauge metal. The cross bar seats the motor better, and
neoprene washers are used between the motor and cross bar to help make it even
quieter.
The GF-14 Garage Fan and Attic Cooler is designed to mount in the ceiling of the
garage, venting to the attic. Properly-sized intake vents are mounted in the
garage door taking in outside ambient air. The GF-14 moves 1350 cubic feet per
minute, enough air to pressurize a typical attic relative to the house forcing
the superheated attic air out the attic vents, which may include gable vents,
ridge vents, dormer vents, whirly vents, etc.
An adjustable thermostat allows homeowners to decide when the GF-14 should activate for their particular climate or season.
In compliance with local building codes,
garages have 5/8 inch fire-rated drywall and a self-closing fire-rated entry
door. The GF-14 has a fire damper that automatically closes in the event of a
garage fire keeping the flames out of the attic. And the self lubricating,
continuous duty fan motor stops so it doesn't feed a garage fire with air.
The GF-14 Will Require 1.8 square feet net free of intake/exhaust ventilation.
The GF-14 includes fan kit, grille, and two intake grills that should be mounted
to your garage door to allow outside air into the garage. We now also offer
different options of vents with insect screens and a through the wall kit, make
your selection from the Options pulldown by the Add to Cart Button.
** CAUTION - FAILURE TO PROVIDE PROPER INTAKE VENTS CAN RESULT IN BACK DRAFTING
OF GAS APPLIANCES LOCATED THE CONFINES OF YOUR GARAGE **
This unit requires
hardwired installation. We recommend a licensed electrician to properly
wire the unit.
|
|
|
Dimensions:
The Fan is 18” w x 18” w x 17” h With Fire Damper Closed, Open - 22” h
Fan Grill is 17.75” x 17.75” x 0.25”
Intake Grill is 16” w x 8” h x 0.25”
The GF-14 is installed in the attic space above the garage:
|
|
|
|
Powerful Motor Pulls 1350 cubic feet per minute (CFM) of airflow |
|
| The GF-14 includes a grill which is installed onto the ceiling of your garage: | Vents are installed in your garage door - or along the walls of your garage to allow air intake: |
|
|
|
Dimensions: Ships in 18" x 18" x 18" box
55 watts total power consumption
.45 amps power consumption
1/3 HP motor
Available Options:
- GF14 - Includes 2 Steel Stamped Face Intake Grills
- GF14ASG - Includes 2 Aluminum Stamped Face Intake Grills
- GF14ABG - Includes 2 Premium Aluminum Intake Vents w/Insect Screen
- GF14ABB - Includes 2 Premium Aluminum Intake Vents w/Insect Screen w/Aux Frame for Double Skin Insulated Door
- GF14ABF - Includes 1 Premium Aluminum Through The Wall Vent w/Insect Screen - 14 x 16 Through The Wall Intake Vent with Interior frame and expandable from 4″ to 8″ Wall Thickness
Download the Installation Instructions
Warranty - fan housing is warranted to be free from defects for 10 years. The fan motor, thermostat, switch and controls are warrantied for 2 years.
Please note, this fan cannot be returned if installed.
Answer: The GF-14 includes two intake grills that should be mounted to your garage door to allow outside air into the garage.
Question: Does this unit cost anything to operate; electricity etc..? Other than the installation process is it cost free to operate?
Answer: Yes, the GF-14 Garage ventilation system uses electricity. The total power consumption is 55 watts - .45 amps.
Question: Where is the thermostat mounted?
Answer: The thermostat is built into the control box on the GF-14 Garage cooling system.
Question: Is the adjustable thermostat wall mounted?
Answer: No, the thermostat is built into the control box on the GF-14 Garage cooling system.
Question: Is the thermostat adjustable and if not can it be replace with one with a range from 70 degrees to 110 degrees?
Answer: Yes, the GF-14 garage ventilation system has an adjustable thermostat. The thermostat is adjustable between 90-130 degrees.
Question: Will this work in a misty wet environment and what size is the motor?
Answer: Yes, the GF-14 Garage ventilation fan will remove damp air and has a 1/3 HP motor.
Question: How much noise does the GF-14 make while operating?
Answer: The GF-14 operates quietly but does not have a sound level rating.
Question: Can I buy additional intake door vents?
Answer: Yes, please call to order.
Question: Can a back draft damper be added?
Answer: No.
Question: Is there or can there be an on off switch to manually operate the GF-14 instead of or in conjunction with the thermostat?
Answer: Yes, you can override the thermostat and wire in an on/off switch.
Question: Can this fan be mounted horizontally in that wall to vent to the attic?
Answer: No.
Question: Is damper closed when fan not in use?
Answer: No, on the GF-14 the damper is a fire damper so will only close if there is a fire in the garage to keep the flames out of the attic.
Question: Can this unit be installed on a vertical side wall and vent directly outside?
Answer: No.
Question: Do any of the intake vents have any type of hurricane rating?
Answer: No, they do not.
